Updated
How binaural beats happen
Play a 197 Hz tone into your left ear and a 203 Hz tone into your right, and you do not hear two tones a few hertz apart. You hear one tone in the middle of your head that swells and fades six times a second. The beat is not in either signal; it is produced by your auditory system, which compares the timing of the sound at the two ears in the brainstem and turns the slowly sliding difference into a perceived pulse. The effect was described by the physicist Heinrich Wilhelm Dove in 1839.
That is why headphones are essential. Through speakers both ears hear both tones, the two tones mix in the air, and you get ordinary acoustic beating instead: a real wobble in loudness that any microphone can record. It sounds similar, but it is a different thing, called a monaural beat.
The binaural effect is strongest with carrier tones in the low and middle range, roughly below 1,000 Hz, and with differences up to about 30 or 40 Hz. Above that the pulse turns into roughness and then into two separate tones. This generator keeps the carrier between 100 and 1,000 Hz and the beat between 0.5 and 40 Hz for that reason.
Using the generator
The readout shows the beat and the two frequencies actually playing. With the default carrier of 200 Hz and a 6 Hz beat, the left ear gets 197 Hz and the right ear 203 Hz: the carrier sits exactly between them. Change the beat or the carrier while it plays and the tones glide to the new values without a click.
The five preset buttons set the beat to 2, 6, 10, 20 or 40 Hz. Their names are the labels that brain-wave researchers use for EEG frequency bands, and the table in the Numbers tab lists the usual ranges with the left and right frequencies each preset produces. A lower carrier sounds deeper and softer; 100 to 250 Hz is a comfortable range for most people, while higher carriers sound brighter and can tire the ears sooner.
Background adds pink or brown noise under the tones. It does not change the beat, which still comes from the two sine waves, but it makes them less bare. Check left and right plays a lower tone in the left ear and a higher one in the right, so you can confirm your headphones are on the right way round and that both sides work.
What the band names mean, and what they do not
Delta, theta, alpha, beta and gamma are names for frequency ranges in recordings of the brain's electrical activity. Delta waves are prominent in deep sleep, alpha in relaxed wakefulness with eyes closed, beta in alert activity. The popular idea behind binaural beats is that listening to a beat in one of those ranges nudges the brain toward the matching state, a process often called entrainment.
The evidence for that is weaker than many apps suggest. Some studies report small effects on mood, anxiety or attention; others find nothing, and measurements of brain activity during binaural beats give inconsistent results. Expectation and simply sitting quietly with headphones for twenty minutes play a part too. WaveTinker uses the band names only as labels for frequencies. Nothing on this page claims that a beat will improve sleep, focus, memory or health.
If you enjoy listening to them, or they help you settle into a routine, there is no harm in that at a sensible volume. If you have epilepsy or a seizure disorder, ask your doctor before using rhythmic audio stimulation of any kind.
Binaural beats for sleep, study and meditation
People use binaural beats in three common ways. For winding down, a slow beat in the delta or theta range with brown noise underneath and a 20 or 30 minute timer. For studying, an alpha or beta beat at a very low level, or none at all if the tones turn out to be distracting. For meditation, a steady theta beat as something to rest attention on, much like a ticking clock.
Sleeping in headphones is uncomfortable and can press on the ears, so for sleep many people play the beats while falling asleep and let the timer stop them. Earbuds made for sleeping are an option, but keep the volume at the low end.
Whichever use you try, give it a fair test: the same time of day for a week, with and without the beat. Your own comparison tells you more than any claim about brain waves.
Safe listening levels
Binaural beats only need to be audible, not loud. The effect does not grow with volume, so there is never a reason to turn it up. Set the device volume low before you press Play and raise it until the tones are just clearly there.
Long sessions in headphones add up even at moderate levels. Keep sessions to a reasonable length, use the timer, and take breaks. Pure tones can feel quieter than they are, especially low ones, so judge by comfort rather than by how strong the beat seems.
Binaural beats, monaural beats and isochronic tones
Three kinds of rhythmic tone are often mixed up. Binaural beats need headphones and exist only in your perception. Monaural beats are two tones mixed together before they reach the ear, so the loudness really rises and falls; they work on speakers. Isochronic tones are a single tone switched on and off at a regular rate, a sharp pulse that also works on speakers.
This page generates binaural beats only. If you play it on speakers anyway, you will hear monaural beating from the two tones mixing in the room, which is why the warning at the top asks for headphones. The tone generator on this site has a simpler binaural option of its own, if you want to explore a single carrier with any waveform.
If you cannot hear the beat
First check the headphones. Press Check left and right: if both tones come from both sides, something is mixing the channels to mono. Common culprits are a mono accessibility setting in the phone or computer, a single earbud, and Bluetooth headsets that switch to a low-quality call mode when a microphone is active; close any call or voice app and reconnect.
Then check the numbers. A slow beat of 0.5 to 2 Hz is a gentle swell every second or two and is easy to miss at first; listen for a few breaths. A fast beat of 30 to 40 Hz no longer sounds like a pulse at all, more like a slight roughness, which is normal. The beat is also clearer on a low carrier: if you raised the carrier toward 1,000 Hz, bring it back to about 200.
Finally, the background noise. Brown or pink noise at the same level as the tones can bury a slow beat. Lower the volume of everything and listen without the noise first; once you know what the pulse sounds like, it is easier to hear it under the noise too.
Made on your device
The two tones and the background noise are synthesized in your browser with the Web Audio API. No audio is downloaded or uploaded, and the generator does not use the microphone.
Frequently asked questions
Do binaural beats work?
The beat itself is real: with headphones you hear a pulse at the difference between the two tones. Whether that pulse changes your mental state is another question. Studies are mixed, with some small positive results and many null ones, so treat claims about sleep, focus or healing with caution. WaveTinker makes no health claims.
Do I need headphones for binaural beats?
Yes. Each ear has to hear only its own tone. On speakers both ears hear both tones, which mix in the air into an ordinary loudness wobble, a monaural beat, not a binaural one. Use the Check left and right button to make sure your headphones are on correctly.
Which frequency should I use?
The presets follow the usual band labels: delta 2 Hz, theta 6 Hz, alpha 10 Hz, beta 20 Hz, gamma 40 Hz. People commonly choose delta or theta for winding down and alpha or beta for study, but there is no proven best frequency. Try one for a week and compare with silence.
What is the carrier frequency?
It is the pitch the two tones are centered on. With a 200 Hz carrier and a 6 Hz beat, the left ear gets 197 Hz and the right 203 Hz. The beat depends only on the difference; the carrier decides whether the sound is deep or bright. Carriers between about 100 and 250 Hz are comfortable for most listeners.
Are binaural beats safe?
At a low volume they are simply quiet tones. Keep the level just audible, use the timer and take breaks. People with epilepsy or a seizure disorder should ask a doctor before using rhythmic audio stimulation, and nobody should listen while driving or doing anything that needs full attention.
Can I add rain or noise under the tones?
You can add pink noise, which sounds like steady rain, or deeper brown noise from the Background menu. Both are generated in your browser. The beat still comes from the two tones; the noise only makes the sound fuller and can mask the room around you.