Updated
What brown noise is
Brown noise is named after Robert Brown, the botanist who described the jittery random motion of pollen grains in water, not after the color. A signal that wanders the way those grains do, each step a small random move from the last, has a spectrum that falls 6 dB for every doubling of frequency. Most of its energy sits in the bass, and the top end is faint. It is sometimes called red noise for the same reason white noise is called white: by analogy with light, where red is the low end of the spectrum.
To the ear, brown noise is a deep, rounded roar. Think of the inside of an airplane at cruising altitude, surf heard from behind a dune or a heavy waterfall in the distance. There is no hiss to speak of, which is why many people who cannot stand white noise find brown noise easy to live with for hours.
The table in the Numbers tab puts numbers on it. Of all the power between 20 Hz and 20 kHz, brown noise puts about 92 percent below 250 Hz and under 1 percent above 2 kHz. White noise does almost exactly the opposite.
Pink noise: the middle ground
Pink noise sits between white and brown. Its power falls 3 dB per octave, which works out to the same energy in every octave: as much between 100 and 200 Hz as between 1,000 and 2,000 Hz. Because hearing is organized in octaves, that sounds even and natural, like steady rain on a roof or wind through trees.
Audio engineers use pink noise to test and balance speakers for the same reason, and the speaker test on this site uses it. As a pink noise generator for sleep or focus it is the most versatile of the three: full enough to mask voices, soft enough to leave on for a long time. If you are not sure which color you want, start with pink.
Pink noise here is made with a well-known filter design by Paul Kellet that keeps the slope accurate to a fraction of a decibel across the audible range, and the build tests measure the slope on every release.
Brown noise vs white noise, side by side
The difference is where the energy goes. White noise has equal power per hertz, so the wide upper octaves dominate and it sounds bright. Brown noise loses power fast as frequency rises, so the low octaves dominate and it sounds dark. Pink noise splits the difference. Press Play and switch between the three colors while watching the spectrum: the shape tilts from rising, to flat, to falling.
What each one covers follows from that. White noise is strongest where voices, dishes and keyboard clicks live, so it is the best mask for an office conversation. Brown noise is strongest where traffic, a neighbor's subwoofer, plumbing and footsteps on the floor above live, so it is the better mask for low, booming disturbances. Pink noise covers a bit of both.
Comfort follows the same pattern. Bright noise is more fatiguing, deep noise more soothing, which is why brown noise is popular for sleep and long sessions even though it masks speech less completely.
Brown noise for sleep and focus
Like any steady background, brown noise helps sleep mainly by making sudden sounds less abrupt. Its low rumble suits bedrooms near roads and apartment buildings with thumping neighbors. Set it just loud enough that the intruding noise fades into it, place the speaker away from your head and use the timer if you only need help drifting off.
Brown noise has a following online as a focus aid, including claims about ADHD. The research behind those claims is thin: there are small studies on noise and attention, mostly with white or pink noise, and results vary from person to person. This page makes no health claim. If a quiet brown rumble helps you settle into work, that is reason enough to use it; if it does not, nothing is lost.
For focus, keep the level lower than for sleep. A noise you are aware of all the time is a distraction of its own.
Getting real bass out of small speakers
Brown noise asks a lot of the speaker. Phone and laptop speakers reproduce very little below about 150 Hz, which is where brown noise keeps most of its energy, so on a phone it can sound thin, quiet and more like pink noise than the deep roar you expected. That is the speaker, not the noise.
Headphones, a Bluetooth speaker with a proper woofer or a computer with external speakers reproduce far more of it. If you have only a phone speaker, try pink noise instead, which keeps more energy in the range small speakers can play, or accept a lighter brown sound.
All three colors are generated at the same signal level, measured as RMS. Because ears are less sensitive to deep sound, brown noise at the same setting seems quieter than white, and it is tempting to turn it up further than you would. Raise the volume in small steps, and if in doubt, check the level with the decibel meter on a second device.
How the noise is made
Every sample starts as a random number. For brown noise, each new value is the previous one plus a small random step, with a tiny leak that pulls it back toward zero so it cannot drift out of range. The leak only matters below about 11 Hz, under the range of hearing, so everything you can hear follows the 6 dB per octave slope. The slow offset that remains is removed before playback.
Twenty seconds of noise are generated for each ear, different on the left and the right, and the end is blended into the beginning so the loop has no click. The Tone setting adds a gentle low-pass filter on top: Softer above about 6 kHz and Muffled above about 1.5 kHz. With brown noise those settings change little, since there is so little treble to begin with, but they make pink noise noticeably darker.
Which color for which room
A bedroom on a busy street: brown noise, because traffic is mostly low rumble and brown is strongest exactly there. A thin apartment wall with a talkative neighbor: pink noise, which keeps enough upper energy to blur words while staying soft. An open-plan office or a café table: white or pink, since the problem is speech and clatter in the upper range.
A baby who naps during the day: pink or brown at a low level, far from the crib, with the timer set so it ends on its own. A long flight or a train: brown noise in headphones blends with the engine rumble and makes it less tiring. Tinnitus is a medical matter for a doctor or audiologist, but many people notice that a soft background sound makes ringing less prominent in a quiet room; if you try it, keep the level low.
None of these are rules. Two people in the same room can prefer different colors, and the same person can prefer brown at night and pink during the day. Switching is instant, so let your ears decide.
Volume, timer and privacy
Long listening at a moderate level adds up, so keep it below conversation level and lower still for a child's room. The timer runs from 15 minutes to 8 hours and fades out over several seconds at the end. The noise is generated on your device, nothing about what you play is uploaded, and once the page is open it uses no data.
Frequently asked questions
What is brown noise?
Brown noise is random sound whose power falls by 6 dB for every octave up, so most of it sits in the bass. It sounds like a deep, steady roar, similar to an airplane cabin or a distant waterfall. The name comes from Brownian motion, described by the botanist Robert Brown, not from the color.
What is the difference between brown noise and white noise?
White noise has equal power at every frequency and sounds bright and hissy; brown noise loses power quickly as frequency rises and sounds deep and soft. Of the power between 20 Hz and 20 kHz, brown noise keeps about 92 percent below 250 Hz, white noise about 1 percent. White masks voices better, brown masks traffic and bass better.
What is pink noise?
Pink noise has the same energy in every octave, so it falls 3 dB per octave in power per hertz. It sounds like steady rain or wind, fuller than white noise and lighter than brown. Engineers use it to test speakers, and many people find it the easiest of the three to listen to for a long time.
Is brown noise good for sleep?
For many people, yes, especially when the sounds that wake them are low: traffic, footsteps, a neighbor's music. Like any steady noise it works by making sudden changes less noticeable. Keep it quiet, put the speaker away from your head and use the timer if you only need it to fall asleep.
Does brown noise help with ADHD or focus?
There is little research on brown noise specifically. A few small studies suggest background noise can help some people who are easily distracted, mostly using white or pink noise, and results vary widely. WaveTinker makes no health claim; if it helps you concentrate, use it at a low level.
Can I play brown noise under binaural beats?
Yes. The binaural beats page has a Background setting that adds pink or brown noise under the two tones, generated the same way as here. The noise does not change the beat itself, which comes from the difference between the two tones in your headphones; it simply makes the tones less bare to listen to.
Why does brown noise sound quiet on my phone?
Phone and laptop speakers play very little below about 150 Hz, and that is where brown noise has most of its energy. Use headphones or a speaker with a real woofer to hear the full sound, or switch to pink noise, which small speakers reproduce better.